Description

EASA Part 66 Module 6 B2 Materials and Hardware:

• This Book is fully compliant to EASA Part 66 requirement for B2 aircraft maintenance license.
• Materials and Hardware strictly matches the requirements of Part 66 including its content, sequence, and the required learning levels (L1, 2, or 3) needed for an approved B2 avionics maintenance technician\’s program, and is so approved by many national authorities as a part of the training programs of Part 147 schools within their jurisdiction.

Table of Contents:

As prescribed in Part 66 Appendix 1

1. Ferrous Metals
   Characteristics, properties and identification of common alloy steels used in aircraft; heat treatment of alloy steels; testing for hardness, tensile strength, fatigue strength, and impact resistance.
2. Non-Ferrous Metals
   Characteristics, properties and identification of common alloy steels used in aircraft; heat treatment of non-ferrous metals; testing for hardness, tensile strength, fatigue strength, and impact resistance.
3. Composite and Non-Metallic
   Characteristics, properties and identification of composite materials.
4. Corrosion
   Chemical fundamentals; formation by galvanic action process, microbiological, stress; types of corrosion and their identification; causes of corrosion; material types, susceptibility to corrosion.
5. Fasteners – Screw Threads
   screw nomenclature; thread forms, dimensions and tolerances for standard threads used in aircraft; measuring screw threads.
6. Bolts, Studs, and Screws
   bolt types: specification, identification and marking of aircraft bolts, international standards;
   nuts: self locking, anchor, standard types;
   machine screws: aircraft specifications;
   Studs: types and uses, insertion and removal;
   self tapping screws, dowels.
7. Locking Devices
   tab and spring washers, locking plates, split pins, pal-nuts, wire locking, quick release fasteners, keys, circlips, cotter pins.
8. Aircraft Rivets
   types of solid and blind rivets; specifications and identification, heat treatment.
9. Pipes and Unions
   identification of and types of rigid and flexible pipes and their connectors used in aircraft; standard unions for aircraft hydraulic, fuel, oil, pneumatic, and air systems pipes.
10. Springs
    Types of springs, materials, characteristics and applications.
11. Bearings
    Purpose of bearings, loads, material, construction; types of bearings and their application.
12. Transmissions
    gear types and their application; gear ratios, reduction and multiplication gear systems, driven and driving gears, idler gears, mesh patterns; belts and pulleys, chains and sprockets.
13. Control Cables
    types of cables; end fittings, turnbuckles and compensation devices; pulleys and cable system components; Bowden cables; aircraft flexible control systems.
14. Electrical Cables and Connectors
    cable types, construction and characteristics; high tension and coaxial cables; crimping; connector types, pins, plugs, sockets, insulators, current and voltage rating, coupling, identification codes.

Read more: afoullous.com

part 66 module 6 book materials and hardware instrument systems, part 66 module 6 book, easa part 66 module 6, book for b1 & b2 Certification, easa part 66 digital techniques, physics b1 & b2 Certification, part 66 module digital techniques, part 66 module 6 book digital techniques,…